2 1/16" 5000psi Casing Head Wellhead Christmas Tree

SECTION A, CASING HEAD HOUSING 13-3/8" SOW, 13-5/8" API 3000 PSI,ALL MADE OF

FORGED STEEL,EACH SET CONSISTING OF:

1-CASING HEAD HOUSING,13-5/8" API 3000 PSI TOP FLANGE X 13-3/8" SLIP-ON WELD

LOWER CONN. W/TWO 2"API LP SIDE OUTLETS 1-RING GASKET,R-57

20-STUD BOLTS&NUTS,1-3/8"X10-3/4" STUD, EACH WITH TWO NUTS,ZINC PLATED

1-CASING HANGER,W/SEAL ASSY,13-5/8" X 9-5/8" OD CASING

1-NIPPLE,2" API LP X 8" LONG

1-GATE VALVE,2-1/16" API 3000 PSI WP,

2-1/16" BORE W/2" API LP FEMALE,THRD ENDS,REGULAR TRIM,INCL. HAND WHEEL

1-PLUG,2"APILPX5"LG,TAPPED W/1/2"APILP

1-BLEEDER PLUG,1/2" APILP,ALLOY STEEL

SECTION B, CASING HEAD SPOOL 13-5/8" API 3000 X 11" API 3000 PSI,ALL MADE OF

FORGED STEEL,EACH SET CONSISTING OF:

1-CASING HEAD SPOOL,13-5/8" API 3000PSI X 11" API 3000 PSI W/TWO 2-1/16" API

3000 PSI FLANGE STUDDED SIDE OUTLETS W/ 1-1/2" THRD FOR VALVE REMOVING PLUG BOTTOM FLANGE WITH SEAL PREPARATION

1-RING GASKET,R-53

16-STUD BOLTS&NUTS,1-3/8"X10" STUD,EACH WITH TWO NUTS,ZINC PLATED

1-SECONDARY SEAL ASSY.,13-5/8" X 9-5/8" OD CASING

1-CASING HANGER,WITH SEAL ASSY.,11"X7" OD CASING

2-GATE VALVE,2-1/16" API 3000 PSI,

2-1/16" BORE,FLG ENDS,REGULAR TRIM,INCL HAND WHEEL, BOTH END COMPLETE WITH R24 RING GASKETS,7/8"-6-1/4" STUD BOLTS&NUT

2-API THREADED FLANGE,2-1/16" API 3000 PSI WITH 2" API LP FEMALE THREAD

2-PLUG,2" APILPX5"LG,TAPPED W/1/2"APILP

1-BLEEDER PLUG,1/2"LP,ALLOY. STEEL.

1-NEEDLE VALVE,STRAIGHT TYPE,1/2" LP M X FM THREADS

1-PRESSURE GAUGE,4-1/2" FACE,0-3000 PSI RANGE,WITH 1/2" API LP MALE THREAD,

STAINLESS STEEL CASE. VALVE REMOVING PLUG,1-1/2"

SECTION C, TUBING HEAD SPOOL

3-PIECE 90 DEG TOP ENTRY ELECTRICAL SYS. FOR USE WITHOUT BONNET

11" X 9" X 3-1/2" API 3000 PSI,ALL MADE OF FORGED,EACH SET CONSISTING OF:

1-TUBING HEAD SPOOL 11" API 3000 PSI X 9" API 3000 PSI,C/WITH TWO 2-1/16" BOT-

TOM FLANGE WITH SEAL PREPARATION

1-RING GASKET,R-49

12-STUD BOLTS&NUTS,1-3/8"X9-1/2" STUDS,EACH WITH TWO NUTS,ZINC PLATED

1-SECONDRY SEAL ASSY.,11"X7" OD CASING

1- TUBING ADAPTER FLANGE(ROTATING FLANGE TO ELIMINATE ANY ALIGNMENT PROBLEM) 9"X 3000 PSI ROTATING FLANGE BOTTOM& 3-1/8" X 3000 PSI FLANGED TOP COMPLETE WITH BOTTOM PREPARED TO ACCEPT COSCO PENETRATOR,ELECTRICAL CONNECTION PORT PLUGGED TOP&BOTTOM WITH REMOVABLE PLUGS.

90 DEG.UPPER CONNECTOR:COMPLETE WITH 25 FT NO.1 AWG,4KV REDA BLACK,ROUND CABLE SCREW ON PIGTAIL,GALVANIRED ARMOUR

1-TUBING HANGER WITH SEAL,9"X3-1/2" W/

3-1/2" EUE FEMALE THREADED TOP&BOTTOM COMPLETE WITH PREPARATION TO ACCEPT COSCO FEED THROUGH SYS.,ELECTRICAL CONN. PORT PLUGGED TOP&BOTTOM WITH REMOVABLE PLUGS; LOWER INTERNAL CONNECTOR;

COMPLETE WITH 15 FT NO.1 AWG,4KV REDA BLACK,ROUND CABLE SCREW ON PIGTAIL,GALVANIZED ARMOUR. TRANSMITTION ELEMENT FOR 4KV&125AMPS

POWER&TRANSITION SLEEVE

TO BE USED IN BETWEEN THE ADAPTER FLANGE & TUBING HANGER

2-GATE VALVE,2-1/16" API3000PSI,2-1/16" BORE,FLANGED ENDS,REGULAR TRIM,INCL.

HANDWHEEL,BOTH ENDS COMPLETE WITH R-24 RING GASKETS,7/8"-6-1/4" STUD BOLTS&NUT

2-API THREADED FLANGE,2-1/16" API 3000 PSI W/2" API LP FEMALE THREAD.

2- PLUG,2" API LPX5"LG, TAPPE- W/1/2"APILP

1-BLEEDER PLUG,1/2"LP,ALLOY STEEL

1-NEEDLE VALVE,STRAIGHT TYPE, 1/2" LP TM X FM THREADS 1-PRESSURE GAUGE,4-1/2" FACE,0-3000 PSI RANGE,WITH 1/2" API LP MALE THREAD STAINLESS STEEL CASE

SECTION D,X-MASS TREE,3-1/8" API 3000 PSI FOR GENERAL SERVICE,ALL MADE OF

FORGED STEEL,EACH SET CONSISTING OF:

4-GATE VALVE,3-1/8" API 3000 PSI ,3-1/8" BORE,FLANGED ENDS,INCL. HAND WHEEL,BOTH ENDS COMPLETE WITH R-31 RING GASKET & 7/8"X6-1/4" STUD BOLTS & NUTS

1-STUDDED CROSS,3-1/8"X3-1/8"X3-1/8"X3-1/8" API 3000 PSI

1-X-MASS TREE CAP,3-1-8" API 3000 PSI, FLANGED CONNECTION COMPLETE WITH R-31

RING GASKET 7/8"X6-1/4" STUD BOLTS &NUTS,WITH 3-1/2" EUE PICK UP THREAD,BL-

ANKING PLUG TAPPED 1/2" LP THREAD

1- ADJUSTABLE CHOKE,NOMINAL SIZE 3-1/8",INLET&OUTLET FLANGED 3-1/8" API 3000PSI

1-WELDNECK FLANGE,3-1/8" API 3000PSIX3" SCH 80. COMPLETE WITH R-31 RING GASKET & 7/8"X6-1/4" STUD BOLTS & NUTS

2- NEEDLE VALVE,STRAIGHT TYPE,1/2" LP M X FM THREADS

1- PRESSURE GAUGE,4-1/2" FACE,O-3000PSI RANGE,WITH 1/2" LP MALE THREAD, STAIN-LESS STEEL.CASE

2- COMPANION FLANGE,3-1/8" API 3000 PSI WITH 2" LP FEMALE THREAD.COMPLETE WITH R-31 RING GASKET&7/8"X6-1/4" STUD BOLTS &NUTS

1-BLEEDER PLUG,1/2" API LP MALE THREAD ALLOY STEEL.