|
Product Details:
|
| Application: | Making Up/Breaking Out | Usage: | Oilfield Handling Tools |
|---|---|---|---|
| Product: | Sucker Rod | Standard: | API |
| Process Type: | Assy | Condition: | New |
| Size: | 16-28mm | Material: | Alloy Steel |
| Working Condiction: | Standard Service | ||
| High Light: | drill pipe handling equipment,drilling handling tools |
||
Oil Well Handling Tools Tubing Power Tong
Model XQ28/2.6 hydraulic power tong is an improved type of XYQ1.8 which is used to make up and break out sucker rod thread in Well Service. This product has the following features:
A. The structure is compact ,concise and light.Master tong is driven by low speed large torque hydraulic motor which matching with manual control valve. The backup tong just like a spanner. Total weight is approximately equal to XYQ1.8.
B.The operating is briefness and convenience with high efficiency. Put the respondence size jaw set into master tong and the respondence size glutting into backup tong , turning the reset knob in correct direction then can make up and break out sucker rod by operating manual control valve. Two speed,snapping at low speed, spinning at high speed .
C. Large low gear torque,especially suitable for the instance that is difficult to break out sucker rod thread.
SEPCIFICATION
a. Application Range:Sucker Rod : 16. 19. 22. 25. 28 mm
b. High Gear Rated Torque:0.8 kN.m (590 lbf.ft)
c. Low Gear Rated Torque:2.6 kN.m (1900lbf.ft)
d. High Gear Maximum Torque:≥1.2 kN.m (740lbf.ft)
e. Low Gear Maximum Torque:≥3.2 kN.m (2400lbf.ft)
f. High Gear Maximum Rotation Speed: 98 (r/min)
g. Low Gear Maximum Rotation Speed: 32 (r/min)
h. Opening of Tong Head:62 (mm)
i. Overall Dimension (L×W×H):670×383×490 (mm)
j. Weight:100 (Kg)
k. Rated system Pressure:10 (MPa)
l. Max Oil Supply:80 (L/min)
Correspondence of Jaw set, glutting and sucker rod
|
Sucker Rod : |
Jaw Set |
Glutting |
|
CYG16 |
16. 19. 22 |
16 |
|
CYG 19. 22 |
16. 19. 22 |
19. 22 |
|
CYG 25 |
25 |
25 |
|
CYG 28 |
28 |
28 |
ORDINARY PROBLEMS AND TROUBLESHOOTING GUIDE
|
Ordinary Troubles |
Cause |
Remedy |
|
Master tong die set slippage.
|
A. Die set are selected improperly. |
Change suitable die set |
|
B. Tong die set are much worn |
Change new die set |
|
|
C. The brake moment of tong head is a little small |
Tighten spring properly |
|
|
D.The tong body is not level. |
Level tong body |
|
|
Backup tong could not clip sucker rod |
A. Glutting are selected improperly. |
Change suitable glutting |
|
B. Glutting are much worn |
Change new glutting |
|
|
C.The tong body is not level |
Level tong body |
|
|
Head of master tong doesn’t align with the opening of housing |
Retaining pins are not wrapped by reset knob shaft |
Turn reset knob then reset. |
|
Engaging a gear is not firm and it drops out easily. |
Locking effort is a little small |
Add adjusting pad and increase the pressure of spring |
|
Jaw set does not retract |
Jaw set’s shape has changed because of high system pressure |
Adjust the system pressure in proper range.Change jaw set |
About JC Wellhead
Jingcheng Petroleum Machinery Manufacturing Co.,Ltd was established in 2008, we are specialized in design and manufacturing of the oilfield wellhead equipment. We - YCJC are a registered supplier for CNPC, GWDC, CCDC in China and got the API certificate from 2010.
In 2012, JC wellhead jointed with ZZ TOP Oil tools to expand the international business, in order to meet the customers' various requirement, we work with other large drilling rig companies to supply the other oilfield equipments, such as drilling rig components (mud pump & parts, rotary swivel, travelling block, hook etc), handling tools ( slip, elevator, spider, casing tong, power tong, mual tong etc.) and so on.
YCJC also engaged in abroad marketing, through these years of efforts, our wellhead equipment is exported to many countries, such as Thailand, UAE, Iran, Brazil, Argentina, USA etc. and enjoyed good reputation from the customers.
Contact Person: Lee M
Tel: 86-13319268557
Fax: 86-29-81779342
